Safety Laboratory
IT/ICT Product Testing Laboratory
This laboratory conducts safety tests on Information and Communication Technology products based on national standard INSO 1037-1, INSO 5233-1 and INSO 4582 and international standard IEC 62368-1, IEC 60950-1 and IEC 60065 according to ISO/IEC 17025.
Safety tests are conducted on electrical and electronic equipment powered by a power source or battery, in the fields of audio, video, information and communication technology, office equipment and the components and subassemblies of these devices with voltages up to 600V, in accordance with national and international standards.
The purpose of these tests is to ensure the design and construction of a safe product. The product is evaluated not only under normal operating conditions but also under potential failure conditions, successive faults, foreseeable misuse, external influences such as temperature, altitude, pollution, humidity, overvoltage from the power supply, and overvoltage on communication networks. The safety of users and technicians must be considered. These tests aim to reduce the potential risks of injury or damage caused by electrical shock hazards, dangerous energies, fire, thermal hazards, mechanical hazards, harmful radiation, and chemical hazards.
List of safety test standards for information and communication technology, audio, and video equipment in accordance with ISO/IEC 17025:
| International/National Standard | Standard Title |
|---|---|
|
IEC 60950-1,
INSO 5233-1
|
Information technology equipment-Safety-Part 1: General requirements |
|
IEC 62368-1,
INSO 4582 |
Audio/video, information and communication technology equipment- Part 1: Safety requirements |
|
IEC 60065,
INSO 4582 |
Audio, video and similar electronic apparatus-Safety requirements |
Medical Electrical Equipment Testing Laboratory
This laboratory conducts safety tests on electrical medical equipment based on national standard INSO 3368-1 and INSO 3368-2-X and international standard IEC 60601-1, IEC 60601-2-X according to ISO 17025 accreditation certificate from National Accreditation Center of Iran (NACI).
Basic safety tests, essential performance tests, and special tests for many medical electrical equipment and medical electrical systems are conducted in accordance with national and international standards based on ISO/IEC 17025.
In this laboratory, basic safety tests, essential performance tests, and special tests for many medical electrical equipment and systems, as well as equipment used to mitigate or reduce adverse effects, injuries, or disabilities, are performed. Tests are conducted for both normal use and reasonably foreseeable misuse scenarios, considering the risk management process.
Equipment such as:
Intensive care ventilators, infant incubators, infant radiant warmers, operating room tables, medical and dental chairs, various dental units, dental chairs and lights, stretchers and other patient transport equipment in ambulances, medical gas pipeline systems, electric suction devices, laboratory centrifuges… can be tested in this laboratory.
List of safety standards for medical electrical equipment:
| International/National Standard | Standard Title |
|---|---|
|
IEC 60601-1, INSO 3368-1 |
Medical Electrical Equipment – General Requirements for Basic Safety and Essential Performance |
|
ISO 80601-2-12, INSO 3368-2-12 |
Basic Safety and Essential Performance of Intensive Care Ventilators |
|
IEC 60601-2-19, INSO 3368-2-19 |
Requirements for Infant Incubators – Characteristics and Testing Methods |
|
IEC 60601-2-21, INSO 3368-2-21 |
Basic Safety and Essential Performance of Infant Radiant Warmers – Characteristics |
|
IEC 60601-2-46, INSO 3368-2-46 |
Safety of Operating Room Tables |
|
IEC 60601-2-52, INSO 3368-2-52 |
Special Requirements for Basic Safety and Essential Performance of Medical Beds |
|
ISO 6875, INSO 3804 |
Dentistry – Patient Chair |
|
ISO 7494-1, INSO 13491-1 |
Dentistry – Dental Units General Requirements and Testing Methods |
|
ISO 7494-2, INSO 13491-2 |
Dentistry – Dental Units – Water and Air Source |
|
ISO 9680, ISIRI 3805 |
General Requirements and Testing Methods |
|
ISIRI 4370 |
Stretcher and Other Patient Transport Equipment in Ambulances – Performance and Design Regulations |
|
ISIRI 6748-1 |
Medical Gas Piping Systems – Terminal Units for Compressed Medical Gases and Vacuum |
|
ISO 10079-1, ISIRI 4592 |
Safety Regulations and Electric Suction Devices |
Medical device software validation Laboratory
Given the rapid growth of technology and information technology in the field of equipment, medical devices are no exception, and today we are witnessing the widespread application of medical software in medical equipment and their up-to-date technologies. One of the principles of safe operation in medical devices is ensuring the optimal and reliable performance of the software in these devices. In this regard, standards such as ISIRI12138 and IEC62304, which deal with the software life cycle processes for medical devices, specifically address the evaluation and validation of medical software. These matters are examined in this laboratory.
Medical software validation is conducted in accordance with national and international standards and based on ISO 17025.
This standard defines the requirements for the software life cycle of medical devices. The processes, activities, and tasks described in this standard create a common framework for the software life cycle processes of medical devices. This standard applies to the development and maintenance of medical device software. The use of this standard is applicable when the software itself constitutes a medical device or is part of a final medical device.
List of software validation standards for medical equipment:
| International/National Standard | Standard Title |
|---|---|
|
ISO 14971 |
Medical devices — Application of risk management to medical devices |
|
IEC 62304, ISIRI 12138 |
Medical device software – Software life cycle processes |
Electrical Equipment for Measurement, Control and laboratory use Testing Laboratory
This laboratory conducts safety tests on for electrical equipment for measurement, control, and laboratory use based on national standard INSO 4232-1, 4232-2-x and international standard IEC 61010-1, IEC 61010-2-x according to ISO/IEC 17025 accreditation certificate from National Accreditation Center of Iran (NACI).
General and special safety tests for many electrical equipment and their ancillary devices used in electrical testing, measurement, process control, and laboratory equipment are conducted in accordance with national and international standards. This ensures that the design and manufacturing methods used provide adequate protection for the operator and the surrounding environment. This standard applies to general safety regulations for electrical devices intended for professional, industrial, and educational purposes, and includes devices and measuring instruments related to the following items:
Electrical testing and measuring devices such as signal generators, reference measuring devices, power supplies, converters, transmitters, and similar equipment. A control electrical device that controls one or more output quantities relative to specified values, each determined by manual adjustment, local or remote programming, or one or more input variables.
Safety tests are conducted in accordance with national and international standards based on ISO/IEC 17025. Laboratory electrical devices are used for measuring, displaying, diagnosing, or identifying materials or for preparing materials.
List of safety test standards for electrical equipment used in measurement, control, and laboratory applications in accordance with ISO/IEC 17025:
| International/National Standard | Standard Title |
|---|---|
|
IEC 61010-1, INSO 4232-1 |
Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements |
|
IEC 61010-2-020, INSO 4232-2-020 |
Particular requirements for laboratory centrifuges |
|
IEC 61010-2-030, ISIRI 4232-2-030 |
Particular requirements for equipment having testing or measuring circuits |
|
IEC 61010-2-033, INSO 4232-2-033 |
Particular requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring mains voltage |
|
IEC 61010-2-040, INSO 4232-2-040 |
Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
|
ANSI/AAMI ST50,
ISIRI 8475 |
Sterilizing equipment-Dry heat (heated air) sterilizers |
|
IEC 61010-2-101, INSO 4232-2-101 |
Particular requirements for in vitro diagnostic (IVD) medical equipment |
|
ISIRI 6036 |
Laboratory Incubator |
|
BS 3970-1, ISIRI 4860 |
Sterilizing and disinfecting equipment for medical products Specification for general requirements |
|
EN 13060, ISIRI 4863 |
Small steam sterilizers is classified in these ICS categories |
Household Electrical Appliances and Similar Items Testing Laboratory
General and special safety tests for many electrical appliances for household and similar uses are conducted in accordance with national and international standards. The Household Electrical Appliances Safety Laboratory holds ISO/IEC 17025 accreditation. In this laboratory, general and special safety tests are performed on many electrical appliances for household and similar uses, with nominal voltages of up to 250V for single-phase appliances and 480V for other appliances, in accordance with national and international standards. This standard covers foreseeable risks associated with devices and appliances used by individuals.
Regulations related to household appliances, which have been established in many countries, are aimed at protecting the health and safety of the consumer.
The safety standards of IEC 60335-1 series include the conditions and test requirements to prevent the occurrence of the following hazards: Electric shock hazards, hazards due to increased temperature – burns, excessive temperature rise of the surrounding environment and insulation, mechanical hazards and cutting, crushing, and explosion, fire hazards – ignition of appliances due to internal failures, radiation hazards, poisoning, toxic gases, and non-ionizing radiation… These hazards relate to both normal use and abnormal performance of appliances.
This center, utilizing the latest equipment in state-of-the-art laboratories, and supported by experienced personnel with ISO/IEC 17025 certification, provides a suitable environment for conducting electromagnetic compatibility (EMC) tests for various electrical household appliances, in accordance with national and international standards, for manufacturers and valued customers.
list of safety test standards for household electrical appliances and similar devices, in accordance with ISO/IEC 17025:
| International/National Standard | Standard Title |
|---|---|
|
IEC 60335-1,
INSO 1562-1 |
Household and Similar Electrical Appliances – Safety – General Requirements |
|
IEC 60335-2-2,
INSO 1562-2-2 |
Vacuum Cleaners and Water Suction Cleaning Devices |
|
IEC 60335-2-3,
INSO 1562-2-3 |
Electric Irons |
|
IEC 60335-2-4,
INSO 1562-2-4 |
Spin Dryers with Rotating Tanks |
|
IEC 60335-2-5,
INSO 1562-2-5 |
Dishwashers |
|
IEC 60335-2-6,
INSO 1562-2-6 |
Fixed Cooking Ranges, Fixed Hotplates, Ovens, and Similar Appliances |
|
IEC 60335-2-7,
INSO 1562-2-7 |
Washing Machines |
|
IEC 60335-2-8,
INSO 1562-2-8 |
Shavers, Trimmers, and Similar Appliances |
|
IEC 60335-2-9,
INSO 1562-2-9 |
Barbecues, Roasters, and Similar Portable Cooking Devices |
|
IEC 60335-2-11,
INSO 1562-2-11 |
Rotary Dryers |
|
IEC 60335-2-12,
INSO 1562-2-12 |
Food Warmers and Similar Appliances |
|
IEC 60335-2-13,
INSO 1562-2-13 |
Immersion Fryers, Frying Pans, and Similar Appliances |
|
IEC 60335-2-14,
INSO 1562-2-14 |
Kitchen Machines |
|
IEC 60335-2-15,
ISIRI 1562-2-15 |
Electric Liquid Heaters |
|
IEC 60335-2-21,
INSO 1562-2-21 |
Electric Storage Water Heaters |
|
IEC 60335-2-23,
INSO 1562-2-23 |
Skin or Hair Care Devices |
|
IEC 60335-2-25,
INSO 1562-2-25 |
Microwave Ovens, including Combination Microwave Ovens |
|
IEC 60335-2-26,
INSO 1562-2-26 |
Clocks |
|
IEC 60335-2-28,
ISIRI 1562-2-28 |
Sewing Machines |
|
IEC 60335-2-29,
INSO 1562-2-29 |
Battery Chargers |
|
IEC 60335-2-30,
INSO 1562-2-30 |
Space Heaters |
|
IEC 60335-2-35,
INSO 1562-2-35 |
Instant Water Heaters |
|
IEC 60335-2-38,
INSO 1562-2-38 |
Commercial Electric Single-Sided and Double-Sided Roasters |
|
IEC 60335-2-39,
INSO 1562-2-39 |
Commercial Multi-Purpose Electric Frying Pans |
|
IEC 60335-2-42,
INSO 1562-2-42 |
Commercial Air Circulation Ovens, Steam Cookers, and Steam Circulation Ovens |
|
IEC 60335-2-43,
INSO 1562-2-43 |
Clothes Dryers and Towel Rail Dryers – Safety |
|
IEC 60335-2-45,
ISIRI 1562-2-45 |
Portable Heating Tools and Similar Appliances |
|
IEC 60335-2-51,
INSO 1562-2-51 |
Stationary Rotary Pumps for Service Water and Heating Installations |
|
IEC 60335-2-52,
INSO 1562-2-52 |
Electric Mouthwashers |
|
IEC 60335-2-54,
INSO 1562-2-54 |
Surface Cleaning Devices Using Liquid or Steam for Household Use |
|
IEC 60335-2-55,
INSO 1562-2-55 |
Electrical Appliances Used in Aquariums and Park Pools |
|
IEC 60335-2-60,
INSO 1562-2-60 |
Electric Jacuzzis and Spas |
|
IEC 60335-2-70,
INSO 1562-2-70 |
Electric Milking Machines – Safety |
|
IEC 60335-2-74,
INSO 1562-2-74 |
Portable Immersion Heaters |
|
IEC 60335-2-80,
INSO 1562-2-80 |
Blower and Vacuum Fans |
|
IEC 60335-2-82,
INSO 1562-2-82 |
Entertainment Machines and Personal Service Machines – Safety |
|
IEC 60335-2-84,
INSO 1562-2-84 |
Toilets |
|
IEC 60335-2-85,
INSO 1562-2-85 |
Fabric Steamers |
|
IEC 60335-2-95,
INSO 1562-2-95 |
Actuators for Vertical Movement of Parking Doors in Residential Buildings |
|
IEC 60335-2-97,
INSO 1562-2-97 |
Actuators for Blinds, Awnings, Curtains, and Similar Equipment |
|
IEC 60335-2-98,
ISIRI 1562-2-98 |
Humidifiers |
|
IEC 60335-2-101,
INSO 1562-2-101 |
Evaporators |
|
IEC 60335-2-103,
INSO 1562-2-103 |
Actuators for Gates, Doors, and Windows |
|
IEC 60335-2-105,
INSO 1562-2-105 |
Multi-Function Shower Cabins |
Photovoltaic Converters Laboratory
The Photovoltaic Converter Testing Laboratory at the Research Center Informatics Industries, accredited with the ISO/IEC 17025 standard, is equipped with the latest and most advanced measurement equipment. With the expertise of skilled, specialized, and experienced personnel, it is the most comprehensive photovoltaic converter testing laboratory in the country, ready to provide testing services to manufacturers, importers, and exporters.
Photovoltaic (PV) cells are known as solar cells for their outdoor applications. The main components of a photovoltaic system include: solar panels, storage batteries, direct-to-alternating current inverter, controller device, metal or building structure, and communication cables.
| International/National standard | Range | Test title | Product name |
|---|---|---|---|
|
IEC 62116 |
up to 5Kw |
Measurement of islanding prevention for equipment connected to photovoltaic inverters |
Photovoltaic Converters |
|
IEC 61727,
ISIRI 11859 |
up to 5Kw |
Grid connection characteristics of photovoltaic systems |
Photovoltaic Converters |
|
IEC 62109-1 |
up to 5Kw |
General requirements |
Power converters for use in photovoltaic power systems |
|
IEC 62109-2 |
up to 5Kw |
Special requirements |
Power converters for use in photovoltaic power systems |
Lift Control Board Safety Testing Laboratory
Lift safety testing laboratory has ISO/IEC 17025 accreditation and all its tests are performing according to national and international standards.
As the control panel is the most important electronic part of the elevator, gives important and basic commands to the elevator by processing the commands of the elevator from floors and cabin. The design and construction of this part requires going through the standard process steps of the elevator control panel, which should not be ignored in any way. This part is made with high sensitivity, because it is responsible for controlling all the conditions of electrical equipment and driving the cabin. The INSO 6303-1 standard is a mandatory standard for elevators, and it is conducted for vibration, shock, impact tests, heat and cold environmental conditions tests, creep and air gap tests in the laboratories of the Research Center of Informatics Industries.
| International/National Standard | Standard Title |
|---|---|
|
INSO 6303-1, EN81-1 |
Safety rules for the construction and installation of lifts-Part 1: Electric lifts |